Megaloop Loop
System
Complete Package with 38m Cable
Price: £69.95
(Ref: EL2)
The MegaLoop Induction Loop Is ideal for small area coverage and comes complete with amplifier, scart lead, power
supply, tie-clip microphone on lead and 38 meters of loop cable & clips. Installation is simple when following
the easy step by step instructions provided
Ideal for domestic & commercial use (Small meeting rooms, TV lounges etc.)
Echo MegaLoop™ Loop System is a powerful and extremely flexible induction loop amplifier designed with an exclusive
background noise control.
The Megaloop™ Loop System boasts outstanding sound quality transmitting sound direct to your hearing aid. The
greater range of clear undistorted power is almost twice that of previous systems. The improved signal strength
allows the hearing aid to work at its optimum with a huge reduction in background noise. A highly active tone
control circuit allows unparalleled adjustment of high and low tones.
The MegaLoop™ Loop System takes sound from your TV. or other sound source and converts it into a signal which is
fed into a wire fitted in a continuous loop around the edges of the room. This signal can then be picked up by a
hearing aid switched onto the "T" setting. The tone and volume can then be adjusted completely independently from
that coming out of the TV speaker providing the best possible listening conditions
Megaloop Induction Loop Specifications:
Power Supply: 12v AC 10-20 VA or 12-18v DC min. 1.5 amp
Output current > 3 amp peak current, loop resistance less than 1ohm
Frequency Response 100Hz to 5.2khz (v/c middle)
Tone Control Effect 20db range max-min (v/c middle)
Microphone 2 microphone inputs 3.5mm mono/electret condenser
Line Input 2 line-level inputs, Phono connectors, with gain control
Line Output 1 line-level output 3.5mm mono, nominal level -6dBu, output imp. 100ohm
AGC Attack time 60ms, Recovery time 760ms
Dimensions 186mm(W) x 50mm(H) x 82mm(D)
